SATO CL4NX Programming Reference Manual page 510

6) Print resume request command
Upon receive of this command, the printer release the print pause status specified by the print pause request command (SOH + DLE)
and resume printing process.
[Command]
SOH (HEX 01H) + DC1 (HEX 11H)
[Format]
STX + SOH + DC1 + ETX
[Examples]
STX SOH DC1 ETX
[Supplemental explanation]
1. This command shall not be used during sending other data such as print data.
2. There is no returned data to the command. To check the result of the command, you need to send item status request command
(SOH + ENQ).
7) Error release request command in status 5
Upon receive of this command, the printer releases the item No. error or BCC error, and resume printing from the item with the error.
[Command]
SOH (HEX 01H) + SUB (HEX 1AH)
[Format]
STX + SOH + SUB + a + ETX
a "Release" 0: Cancel the data with error
1: print the data with error
[Examples]
STX SOH SUB 0 ETX
[Supplemental explanation]
1. This command shall not be included in the print data (<A>~<Z>).
2. There is no returned data to the command. To check the result of the command, you need to send item status request command
(SOH + ENQ).
502