Example Of Command Reference - SATO CL4NX Programming Reference Manual

4 Example of Command Reference

7.2 Modification
Enlargement
ESC
4 Hexadecimal
<1B>
code
6
Initial value aa = 01, bb = 01
When the power switch is OFF
7
Valid range and
Valid range within items
term of
command
Valid range between items
8 [Function]
Specifying the enlargement ratio of print font.
[Format]
9
<L>aabb
● Parameter
aa [Horizontal enlargementratio]=Valid range: 01 to 36
bb [Vertical enlargement ratio] =Valid range: 01 to 36
10 [Coding Example] Horizontal enlargement ratio: 4 times, Vertical enlargement ratio: 3 times
<A>
<V>100＜H＞200＜P＞3＜L＞0403＜XM＞ABCD
<Q>2
<Z>
11
[Supplementary Explanation]
Enlarges the character pitch as well. When Character Pitch <P> is used at the same time,
the parameter value of horizontal enlargement ratio specified in Enlargement <L> will be reflected
in the subsequent specification <P>.
12
[Note]
If increasing the enlargement ratio, design the print format that does not to exceed print area.
13
[Valid Commands]
<XU>
Font <K3>
<k3>
<M>
Modification <P>
Graphic
<G>
Memory
<TU>
Card
1. Indicates the classification of commands such as:
[Control], [Print Position], [Modification], [Font], [Barcode], [2D code], [Graphic], [System], [Memory Card] and
[Calendar], [RFID], [CommonCommands for All Languages]
2. Indicates command name.
3. Indicates command code.
4. Indicates command in Hexadecimal code.
1
L
<4C>
16 16
<TU> <TU> <XB> <XL>
<K4> <K5> <K8> <K9>
<k4> <k5> <k8>
<WB> <WL> <X20> <X21>
<RF>
<GM> <GP>
<GC> <PY>
3
2
ESC+L
Parameter
aabb
The set parameter is not maintained.
The set parameter is valid until next specification is
made.
The set parameter becomes initial value at the next
item <A>.
<OA> <OB> <RD>
<KA> <KB> <KD>
<k9> <kA> <kB> <kD>
<X22> <X23> <X24>
8
5
<K1> <K2>
<k1> <k2>
<U> <S>