Esc+2D70 Aztec Barcode - SATO CL4NX Programming Reference Manual

10.9 2D code
10.9

ESC+2D70 Aztec Barcode

Aztec 2D code
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within items
command
Valid range between items
[Function]
Specifies Aztec Code.
[Format] (Setting Portion)
<2D70>,a,bb,cc,dd,e,f~f
●Parameter
a [Symbol Type]
b [ECC Percentage]
c [Symbol Size]
d [Number of symbols
for structured append]
e [Message ID]
f [Message ID for structured =
bound symbol]
[Format] (Data part)
<DS>n~n // for ASCII data
<DN>mmmm, n~n // for Binary data
●Parameter
m [Number of Data]
-Set this parameter when Print data are in Binary.
n [Print data]
- When selecting [1BH], make sure to specify [1BH,1BH].
- When selecting [FNC1], make sure to specify [1BH,30H]
- When selecting [ECI], make sure to specify [1BH,*].
[Coding Example]
Symbol Type: Compact, ECC Percentage: Default, Symbol Size: 2 layer, Structured Append: Without append, Message
ID: No, Message ID for structured bound symbol: None, Barcode Data: THIS IS TEST.
<A>
<V>0100<H>0100<L>0404
<2D70>,1,0,2,0,N,<DS>THIS IS TEST
<Q>1
<Z>
[Notes]
1. When parameters other than the description are specified, symbol may not print.
2. When the size of the Aztec code is small, the symbol might not be able to read according to the performance of the
scanner. In that case, please magnify the size of the symbol to make it large enough by using <ESC>L command
maintaining the same ratio of magnification for both length and width.
3. The smallest symbol size is 15x15 modules and largest is 151x151 modules. Available Aztec code formats and its
maximum capacity are as follows:
2D70
<32> <44> <37> <30>
16 16 16 16
= 0 : Full Range Symbol
1 : Compact Symbol
= 0 : Default error correction level
01 to 99 : Error correction percentage
= 0 : Automatic minimization
: 1 to 4 – layer (Compact Symbol) *1
1 to 4
: 4 to 32 – layer (Full Range Symbol) *1
4 to 32
*1 : Following symbol size table reference.
= 0 : Encodes without append
1 : Automatic Setting
2~26 : Append structured blocks
= Y : Specify Message ID for structured bound symbol
N : No Message ID
Printable ASCII string (0x21～0x7E) with maximum 24 bytes.
= 0001 to 1914
= Data
●Generated Label
207
ESC+2D70
Parameter
,a,bb,cc,dd,e,f~f
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
('*' refers from 31H to 36H. )