Esc+Gp Pcx File Print - SATO CL4NX Programming Reference Manual

11.3 Graphic
11.3

ESC+GP PCX File Print

PCX File Print
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within items
command
Valid range between items
[Function]
Specifying the print of PCX file created by such as Paint Brush of Windows.
[Format]
<GP>aaaaa,n~n
●Parameter
a [Total bytes of PCX file]
n [Data]
[Coding Example]
<A>
<V>50<H>50<GP>04500,XXXXXXXXXXXX
<Q>2
<Z>
[Supplementary Explanation]
1. Data is sent in binary data (Outputs 8-bit data as 1 font data all at once) (Total byte size corresponds to file size PCX
file and PCX file data corresponds to data).
2. If [Total bytes of PCX file] is not matching the transfer data, this may become the cause of malfunction.
3. Total bytes are the file size displayed at [Property] and such.
4.PCX file is available in Black/White mode only. In color mode, printing will not be performed due to command error.
Also, this command is not valid for PCX compressed file.
Make sure that the file extension is set to [PCX] before printing.
5.Rotation <%> and Enlargement <L> are available.
6.Enlarge command <L> should be placed just before this command.
7.When using rotation <%> and enlargement <L> commands at the same time, specify <%> command before <L>.
GP Parameter
<47> <50> aaaaa,n~n
16 16
The set parameter is maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
248
ESC+GP