Esc+Gm Bmp File Print - SATO CL4NX Programming Reference Manual

11.2 Graphic
11.2

ESC+GM BMP File Print

BMP File Print
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within items
command
Valid range between items
[Function]
Specifying the print or BMP file created by such as Paint Brush of Windows.
[Format]
<GM>aaaaa,n~n
●Parameter
a [Total bytes of BMP file]
n [Data]
[Coding Example]
<A>
<V>50<H>50<GM>04500，<424D00~00>
<Q>2
<Z>
[Supplementary Explanation]
1. Data is sent in binary data (Outputs 8-bit data as 1 font data all at once) (Total byte size corresponds to file size BMP
file and BMP file data corresponds to data).
2. When [Total bytes of BMP file] is not matching the transfer data, this may become the cause of malfunction.
3. Total bytes are the file size displayed at [Property] and such.
4. BMP file is available in Black/White mode only. In color mode, printing is not guaranteed. Also, this command is not
valid for BMP compressed file.
Make sure that the file extension is set to [BMP] before printing.
5. Rotation <%> and Enlargement <L> are available.
6. Enlarge command <L> should be placed just before this command.
7. When using rotation <%> and enlargement <L> commands at the same time, specify <%> command before <L>.
GM Parameter
<47> <4D> aaaaa,n~n
16 16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
16
247
ESC+GM