Esc+Po Offset - SATO CL4NX Programming Reference Manual

12.16 System
12.16

ESC+PO Offset

ESC
Hexadecimal
code <1B>
16
Initial value a=0, b=+, cc=00
When the power switch is OFF
Valid range and
term of Valid range within items
command
Valid range between items
[Function]
Gives offset to media's stop position on the fly.
[Format]
<PO>>abcc
●Parameter
a [Offset] =
b [Offset direction] =
c [Amount of offset] =
[Coding Example]
<A>
<PO>3+08
<Z>
[Supplementary Explanation]
1. This command does not need to be set in normal printing.
2. Please specify an appropriate value when the printing is off, which is unique for each printer. Printer will not work
properly if you don't specify appropriate value.
Offset
PO
<50> <4F>
16 16
0 : Cutter
1 : Dispenser
2 : Tear-off
3 : Continuous
+ : Feed forward
- : Backward
Valid range : 00 to 99 (dot)
266
ESC+PO
Parameter
abcc
The set parameter is not maintained.
The set parameter is valid until the next valid setting.
The set parameter is valid until the next valid setting.