Esc+Ft Print Triangle - SATO CL4NX Programming Reference Manual

7.9 Modification
7.9

ESC+FT Print Triangle

Print Triangle
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within items
command
Valid range between items
[Function]
Specifying the print of triangle.
[Format]
<FT>,aaaa,bbbb(,cccc,d)
●Parameter
a [Length of sides] = Valid range:
b [Line width] = Valid range:
c [Length of base] = Valid range:
When omitted, its value will be equal to the length of sides.
d [Pattern] = Valid range:
[Coding Example] Length of sides: 100 dots,
<A>
<V>100<H>200
<FT>,100,8,100,0
<Q>1
<Z>
[Supplementary Explanation]
1. When the value outside of the range is specified for pattern, it will be processed as "0". In this case, this will not be a
command error.
2. When the print start position exceeds the printable area, the printing is executed. (This raises a command error.)
(When the print start position exceeds the printable area in the vertical direction, the label will be fed.)
3. When the side length is not equal to the base length, printing will not be performed due to command error.
4. This command sets the base reference point to the apex of a triangle.
0,0
<H>200
a
5. This command can be registered to the format.
6. If setting the line wider, it will be widened inward.
7. If the base length is odd number, +1 will be added automatically to make even number.
[Valid number]
Model
CL4NX
CL6NX
FT
<46> <54>
16 16
10 to 2000 dots
1 to 1000 dots
10 to 2000 dots (omissible)
0 to 3
0: Solid line (black)
1: Gray 1
2: Gray 2
3: Gray 3
<V>100
a: Side length
b: Base length
a
b
Side length
10 to 2000
27
ESC+FT
Parameter
,aaaa,bbbb(,cccc,d)
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
When omitted: 0 (omissible)
Line width: 8 dots,
Valid range (dots)
Line width
1 to 1000
Length of base: 100 dots
Base length
10 to 2000