Esc+Kc Kanji Code - SATO CL4NX Programming Reference Manual

7.11 Modification
7.11

ESC+KC Kanji Code

Kanji Code
ESC
Hexadecimal
code <1B>
16
Initial value a=0
When the power switch is OFF
Valid range and
Valid range within items
term of
Valid range between items
command
[Function]
This command allows temporary switch-over between Kanji codes. Normally it is specified by User mode of printer
LCD settings.
[Format]
<KC>a
●Parameter
a[Kanji code] = 0: JIS code
1: Shift JIS code
2: Unicode
[Coding Example 1] For Shift JIS
<A>
<KC>1
<V>100<H>200<P>2<L>0202
<K1>H81698A94816A83548367815B
<Q>2
<Z>
[Coding Example 2] For JIS
<A>
<KC>0
<V>100<H>200<P>2<L>0202
<K1>H214A3374214B25352548213C
<Q>2
<Z>
[Coding Example 3] For Unicode
<A>
<KC>2
<V>100<H>200<P>2<L>0202
<K1>HFF08682AFF0930B530C830FC
<Q>2
<Z>
[Supplementary Explanation]
1. There is no necessity to specify this command in the normal label printing.
2. To set Shift JIS as initial value, use User mode of printer LCD setting.
3. It is possible to specify multiple Kanji codes within 1 item.
KC Parameter
<4B> <43> a
16 16
The set parameter is not maintained.
The set parameter is valid until the next valid setting.
The set parameter becomes initial value at the next item
<A>.
29
ESC+KC