SATO CL4NX Programming Reference Manual page 371

Parameters related to ASCII mirroring(omissible)
amc: Specify ASCII mirroring data
Specify the page to start ASCII
ams:
mirroring
Specify start byte for ASCII
amb:
mirroring
When specifying these parameters,it is necessary to consider the character number reflected by the user data.
E.g.
NFC:2,ecd:0,lgc:en,ndd:28,AB:00000000000000x000000:EFG,amc:3,ams:0,amb:3
When accessing the tag with this setting, the following is reflected.
E.g.
UID:04-E1-41-12-4C-28-80, NFC counter:00-3F-31
「AB:04E141124C2880x003F31:EFG」
UID NFC counter
Separator
※For NTAG213, NTAG215 and NTAG216, the data specified by amc: is reflected. However, for NTAG210 and NTAG212, as
there is no NFC counter structurally, UID will be reflected automatically.
Parameters modulation mode(omissible)
ame: modulation mode
Parameters related to NFC counter (omissible)
nce: NFC counter update
NFC counter
cfl:
password restriction
Specify the original data to reflect to user data.
Valid range：0～3
0: Nothing is reflected
1: The UID written on the tag is reflected
14 characters are reflected.
2: The NFC counter written on the tag is reflected
6 characters are reflected.
3: Both UID and NFC counter is reflected
21 characters are reflected. (UID 14 characters + NFC counter 6
characters + 1 separating character in between)
Specify which page to start reflecting from in the user memory for the data
specified with amc.
Valid range: 0-255, a 3-digit decimal
A parameter error will occur when a value that exceeds specified inlet
capacity is specified.
IC Chip
Product
type
00 NTAG203
01 NTAG210
02 NTAG212
03 NTAG213
04 NTAG215
05 NTAG216
Specify start byte to reflect the page specified in ams.
Valid range：0～3
UID NFC counter
Separator
Defines the modulation mode.
Valid range：0～1
0: strong modulation mode disabled.
1: strong modulation mode enabled.
CFG1:ACCESS:NFC_CNT_EN
Valid range: 0-1
Sets availability of NFC counter automatic update.
1: enabled (automatically updates counter when READ command is
executed)
0: disabled
CFG1:ACCESS:NFC_CNT_PWD_PROT
Valid range: 0-1
Sets availability of NFC counter password restriction.
0: disabled (password not valid)
1: enabled (password is valid)
363
-：No ASCII mirroring
Valid
range
-
0～11
0～31
0～35
0～123
0～221