Esc+Bd Barcode (Ratio 2:5) - SATO CL4NX Programming Reference Manual

9.4 Barcode
9.4

ESC+BD Barcode (Ratio 2:5)

Barcode (Ratio 2:5)
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within items
command
Valid range between items
[Function]
Specifies a barcode with a ratio of 2:5 between narrow bar and wide bar.
[Format]
<BD>abbcccn~n
●Parameter
a [Barcode symbology] =
b [Narrow bar width] =
c [Height of barcode] =
n [Print data] =
Barcode symbology (Ratio of module composition may not be available depending on the barcode symbology)
A
Barcode symbology
0 CODABAR (NW-7)
1 CODE39
2 ITF
3 JAN/EAN13
4 JAN/EAN8
5
Industrial 2of5
6
Matrix 2of5
H UPC-A
BD Parameter
<42> <44> abbcccn~n
16 16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
Refer to the table below
：
Valid Range 01 to 36 dots
：
Valid Range 001 to 999 dots
data
Set print data including Start/Stop character.
Start/Stop characters are
result of the characters [E,N,T,a,b,c,d,e,n,t] is [D, B, A, A, B, C, D, D, B, A].
e.g.) When barcode print data is [123], specify [A123A].
Barcode character pitch becomes enabled.
For print data, refer to the CODABAR (NW-7) code table.
Set print data including Start/Stop character.
Start/Stop Character is [*].
e.g.) When barcode print data is [12345], specify [*12345*].
Barcode character pitch becomes enabled.
For print data, refer to the CODE39 code table.
Specify print data in even-numbered digit.
If specifying in odd-numbered digit, add "0" to the head of print data.
For print data, refer to the ITF code table.
This barcode has guard bars and human-readable characters
For print data specifications, refer to table of JAN/EAN13 code
This barcode has guard bars and human-readable characters
For print data specifications, refer to table of JAN/EAN8 code
Barcode character pitch is enabled.
For print data specifications, refer to table of Industrial 2of5 code
Barcode character pitch is enabled.
For print data specifications, refer to table of Matrix 2of5 code
This barcode has human-readable characters but guard bar.
For print data specifications, refer to table of UPC-A code
131
ESC+BD
Descriptions
[A,B,C,D,E,N,T,a,b,c,d,e,n,t]. Note that scan
Ratio
2:5
2:5
2:5
Fixed
Fixed
2:5
2:5
Fixed