Usb Host; Basic Specifications; Connector Pin Assignment - SATO CL4NX Programming Reference Manual

9 USB Host

9.1

Basic Specifications

USB interface of the printer complies with USB2.0 standard.
Interface
Connector
Version
Device class
Used for

9.2 Connector Pin Assignment

Pin number
1 VBus
2 -Data(D-)
3 +Data(D+)
4 GND
A Type female
Back × 1 ch, Front × 1 ch
Series A plug
Cable length shorter than 5 m (Twisted pair shielded)
USB 2.0 High speed
Mass storage class, HID class
USB memory (HEX dump, printer settings, firmware (installation))
Name
588