Esc+/N Registration Of Field - SATO CL4NX Programming Reference Manual

Hide thumbs Also See for CL4NX:

Table of Contents

14.9 Memory Card

ESC+/N Registration of Field

Registration of Field

Initial value

When the power switch is OFF

Valid range and

Valid range within item

Valid range between items

Registering items within the field of Registration of Format <YS>.

a [Field number]

b [Digit number of print]

[Coding Example]

<%>0<V>100<H>2002<L>0101<XM>ABC

<%>0<V>200<H>2002<L>0101<OA>12345

<%>0<V>300<H>4040208049123456

[Supplementary Explanation]

1. Specify the value of [Field number] in ascending order.

2. Specify Vertical Print Position <V> and Horizontal Print Position <H> for each field. If not, default value will be

3. Specification of digit number when printing external character.

External code H, one external character has 4 digits; thus, three external characters make 12 digits for printing.

External code B, one external character has 2 digits; thus, three external characters make 6 digits for printing.

4. Use this command and Registration of Format <YS> as a pair.

5. Due to the memory capacity limit, it may not save up to 99 registries.

6. The error occurs when specifying unused or specifying the slot which the printer is allocated.

Don't power off while accessing the memory. There is no guarantee of data in media if the power is turned off while

accessing the memory.

[Designable Commands for the Change of Print]

Modification

The set parameter is not maintained.

The set parameter is valid until the next valid setting.