SATO CL4NX Programming Reference Manual page 413

[Setting saving function]
This command proceeds the setting when the item name and the setting value were specified basically.However, the
problem may occur when the setting data are set in order of receiving the data because the setting item can be omitted
and set in random order. These items will be saved firstly and set after all the received data were analyzed.
The target items and their setting process are described as follows.
Target item
[PRINTER]Time zone
[PRINTER]Date
[PRINTER]Time
[PRINTER]Main port
[PRINTER]Sub port
[BLUETOOTH]ISI
[BLUETOOTH]ISW
[BLUETOOTH]PSI
[BLUETOOTH]PSW
[BLUETOOTH]Deletepairing
information
[SBPL]STX
[SBPL]ETX
[SBPL]ESC
[SBPL]ENQ
[SBPL]CAN
[SBPL]NULL
[SBPL]OFFLINE
[SZPL] Command Head
[SZPL]Control head
[SZPL]Delimiter
[SDPL]SOH
[SDPL]STX
[SDPL]CR
[SDPL]CNT
[STCL]Command Head1 to 3
The time zone must be set firstly because the time difference calculated from the
local time is necessary for setting the date and time.
Settings of the main port and sub-port cannot be duplicated, and the duplicated
code will be ignored.
When "ISI" is smaller than "ISW", it is not set.
There is a function that when "0" is set to both "ISI" and "ISW", Bluetooth module
doesn't respond to the search. Regarding this function, to avoid conflicting
settings, setting it under following condition.
ISI ISW
＝"0" ＝"0"
≠"0"
≠"0"
＝"0"
≠"0"
When "PSI" is smaller than "PSW", it is not set.
There are 10 paring information and they are arrayed. You cannot delete them
one by one because the deleted area is filled with next data and the number will
be inconsistent. You can delete the data when you know all the paring information
to be deleted.
Each control code cannot be duplicated, and the duplicated code will be ignored.
Each control code cannot be duplicated, and the duplicated code will be ignored.
Each control code cannot be duplicated, and the duplicated code will be ignored.
Each control code cannot be duplicated, and the duplicated code will be ignored.
405
Setting process
Process
Set
Don't set
Don't set
Set