Esc+Dc Datamatrix (Ecc200) Data Specify(Compatible Commands) - SATO CL4NX Programming Reference Manual

10.14 2D code
10.14
ESC+DC
DataMatrix (ECC200)
Specify(Compatible Commands)
Data Specify(Compatible Commands)
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within items
command
Valid range between items
[Function]
Specifying data for DataMatrix (ECC200).
[Format] (Data specification part)
<DC>n~n
●Parameter
n [Print data] =
[Coding Example] Cell width: 02, Cell pitch: 02, Number of cells per line: 000 (Auto setup),
Number of cell lines: 000 (Auto setup), Print data: 1234567890
<A>
<V>100<H>200
<BX>01200202000000001
<DC>1234567890
<Q>2
<Z>
[Supplementary Explanation]
DataMatrix (ECC200) can specify from 00H to FFH except for printer control code of 05H, 10H, 11H, 18H, 1BH.
When specifying control code for data, use DataMatrix<2D50>.
Data format
* Value in above table shows the maximum number of data that can be specified as barcode data.
[Note]
This command is for existing models. Using <2D50> is recommended.
Datamatrix (ECC200) Data
DC
<44> <43>
16 16
Data
Data format
Numeric
Alphanumeric
Binary (00H to FFH)
242
ESC+DC
Parameter
n~n
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
Number of data
3116
2335
1556