SATO CL4NX Programming Reference Manual page 440

No Description
[Precautions during use]
1. The printer device information update cycle must be five seconds or longer. When sending this command in
continuation, be sure to set an interval of five seconds or more.
2. When a USB memory is used, only the available space of the memory connected first is returned even when a
connection is established via the HUB.
3. It takes more than one second to create the return data immediately after the startup in order to obtain the checksum
of the module.
4. It takes more time to create the return data when there are a lot of registrations by SBPL command.
(It takes approx. 1.5 seconds to register 10,000 data.)
Device information name
Host
DC2 +PC
STX + a...a,b...b:c...c[CR][LF](d...d:e...e[CR][LF]) ... + ETX
432
Device information data
*If the registration count is zero, the
value is ignored.
Printer