Esc+Bl Upc-A Barcode (Without Hri) - SATO CL4NX Programming Reference Manual

9.14 Barcode
9.14

ESC+BL UPC-A Barcode (Without HRI)

UPC-A Barcode
(Without HRl)
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within items
command
Valid range between items
[Function]
Set the height of character barcode of the first digit and the last digit to the same height of the guard bar.
[Format]
<BL>abbcccn~n
●Parameter
a[Barcode type]
b[Narrow bar]
c[Height of Barcode]
n[Print data]
[Coding Example] Font type: UPC-A, Narrow bar width：03, Barcode height：120, Print data： 01234567890
<A>
<H>100<V>100<BL>H0312001234567890
<Q>2
<Z>
[Supplementary Explanation]
1. This command supports UPC-A only. When barcode type is specified other than "H", command error occurs.
2. Setting of Guard bar, HRI and ratio is described as follows.
Guard bar
Available
3. When the parameter value exceeds the range, operation is not supported.
4. When printing UPC-A with <D>, all character barcodes have the same height. When <BL> is uses, the height of the
character barcode of the start digit and the last digit have the same height of the guard bar.
Character barcode
Guard bar
First digit
UPC-A specifying <D>UPC-A specifying <BL>
BL Parameter
<42> <4C> aabbcccn~n
16 16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
：
= H UPC-A(Fixed 'H')
：
= Valid Range 01~36 dots
：
= Valid Range 001~999 dots
：
= Data 11 fixed digits
HRI Ratio
Nil Fix
Character barcode
Guard bar
Last digit
155
ESC+BL
Character barcode
Guard bar
First digit
Character barcode
Guard bar
Last digit