Optional Rfid Configuration (Cl4Nx Only) - SATO CL4NX Operator's Manual

7 Appendix

7.5 Optional RFID Configuration (CL4NX only)

This chapter explains the procedures on how to configure the printer to encode your inlays.
1
Examine the media to determine the printer settings.
Refer to the CL4NX Inlay Configuration Guide* for the measurements you should take and what they
mean, as well as a list of inlays and their required configurations.
* To see the CL4NX Inlay Configuration Guide, access the following URL:
http://www.satoworldwide.com/rfid/
2
Press the
operator panel until the LED lights up in
blue to power on the printer.
3
When the printer is in online mode, press
the button on the operator panel to
change to offline mode.
4
Press the
menu.
5
Press the
Interface and then press the
6
Press the
and then press the
The RFID screen shows.
322
CL4NX/CL6NX Operator Manual
power button on the
button to show the Settings
/ buttons to select
button.
/ buttons to select RFID
button.