Dc2+Pk Uid Return Request(Iso/Iec15693) - SATO CL4NX Programming Reference Manual

s
17.11
Common Commands
for All Languages
17.11
DC2+PK UID return request
Request(ISO/IEC15693)
(ISO/IEC15693)
Command DC2
HEX code <12>
16
Default value None
When turning off the power
switch
Valid range and
Valid range
term of
Printer operation in
command
progress
Error
[Function]
Returns the status of RFID tag write by <RK> command and UID.
[Format]
[DC2]PK
[[DC2]PK return data format (normal)]
[STX]a...a,b,c,d...d[CR][LF] [ETX]
[Return data]
Symbol Parameter name
Total number of data byte
* This is the total number of bytes after parameter b.
a
The delimiting comma between parameters a and b,
and the ETX are not included.
Write result status
b
Error symbol
c
UID return data
d
UID Return
PK Parameter
<50> <4B> None
16 16
The command cannot be received during the printer operation.
([NAK] return)
Commands can be received even if an error is occurring.
451
DC2+PK
Valid range
Data size from the first write result
status until before [ETX]
Maximum 5 digits
0: Write failure
1: Write success
Note: Specified in text format.
N：No error
U：UID read error
A：All errors
Note: Specified in text format
Refer to "UID return data" as below
Note: Specified in text format