Esc+K1 16X16 Dots Kanji In Vertical Line - SATO CL4NX Programming Reference Manual

8.33 Font
16x16 dots Kanji
8.33

ESC+k1 16x16 dots Kanji in Vertical Line

in Vertical Line
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within items
command
Valid range between items
[Function]
Specifies 16x16 (width x height) dot vertical written Kanji character print
[Format]
<k1>an~n
● Parameter
a[Kanji selection mode]
n[Data]
[Coding example 1]Shift JIS HEX code characters, Horizontal magnification: 3, Vertical magnification: 5
<A>
<V>100<H>200<P>2<L>0305
<k1>H81698A94816A83548367815B
<Q>2
<Z>
[Coding example 2]JIS binary code, Horizontal magnification: 2, Vertical magnification: 3
<A>
<V>100<H>200<P>2<L>0203
<k1>B!J3T!K%5%H!<
<Q>2
<Z>
[Supplementary Explanation]
1. HEX characters
2. Binary code
3. Smoothing function validity range
4. Highlighting function validity range
5. Print result of two bytes under bar "_" is vertical line. (Excluding when the kanji mode is [Japan, Compatible kanji])
6. When the language setting of the printer is Japanese or Simplified Chinese or Traditional Chinese or Korean,
printing follows the language setting.
[Notes]
1. With the highlighting function the character width enlarges proportional with the expansion factor.
2. Using the highlighting function, in some cases, depending on the type of font, characters become squeezed.
[Valid Command]
<V>
Print position
Modification
<P>
k1 Parameter
<6B> <31> an~n
16 16
= H: HEX character
B: Binary code
I: HEX character letters, smoothing function
C: Binary code, smoothing function
J: HEX character letters, highlight function
D: Binary code, highlight function
K: HEX character letters, smoothing and highlight function
E: Binary character letters, smoothing and highlight function
= Refer to the code table (JIS, Shift JIS, Unicode).
= Kanji Code 4bytes ASCII / 1 Kanji character
= Kanji Code 2bytes / 1 Kanji character
= Horizontal/vertical valid range:
= Horizontal/vertical valid range:
<H>
<L> <%> <&>
104
ESC+k1
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
factor 3 to 12
factor 1 to 5
<WD>
</> <0>