Esc+V Vertical Print Position - SATO CL4NX Programming Reference Manual

6.2 Print Position
6.2

ESC+V Vertical Print Position

Vertical Print Position
ESC
Hexadecimal
code <1B>
16
Initial value aaaaa=1
When the power switch is OFF
Valid range and
Valid range within items
term of
Valid range between items
command
[Function]
Specifying vertical print position from its start point by dot.
[Format]
<V>aaaaa
●Parameter
a [Vertical Print Position] = Refer to the table below.
[Coding Example] Vertical print position: 100 dots
<A>
<V>100<H>200<P>2<L>0202<XM>ABCD
<Q>2
<Z>
[Supplementary Explanation]
Specifying the start of vertical position for the print of text, barcode, ruled line and graphics.
[Note]
Any contents such as text, barcode and graphic exceed printable area will not print.
[Initial Value and Valid Range of Parameter]
Model
203dpi
CL4NX 305dpi
609dpi
203dpi
CL6NX
305dpi
V Parameter
<56> aaaaa
16
The set parameter is not maintained.
The set parameter is valid until the next valid setting.
The set parameter becomes initial value at the next item
<A>.
Initial value Valid range (dots)
1 1 to 20000
1 1 to 18000
1 1 to 9600
1 1 to 20000
1 1 to 18000
17
ESC+V