Lan, Wireless Lan; Basic Specifications (Lan) - SATO CL4NX Programming Reference Manual

6 LAN, Wireless LAN

6.1 Basic Specifications (LAN)

Interface
Connector
Link/Status LED
Protocol
Receive buffer size
RJ45
Connector type RJ45
Cable type 10BASE-T, 100BASE-TX (category 5 or upper)
Cable length shorter than 100 (m)
LED lights when LINK with the Ethernet is established or the printer received packet.
C
LED
ol
or
Gr
LED1 ee
n
Y
ell
LED2
o
w
The following communication protocol settings can be made.
Setting Items
Protocol
2.95 MB
0
megabyte
Near full
Near full
release
536
Motion Specification
LED lights for a certain time when received packets
(10 msec)
LED goes off when the printer detected the connection
to 10BASE-T
LED lights when the printer detected the connection to
100BASE-TX
LED lights when a cable is not connected
Setting range
Printer Status 3 Return
Printer Status 4 Return (cyclic response mode)
Printer Status 4 Return (ENQ response mode)
(default value)
Printer Status 5 Return
2.95 MB
0.95 MB
1.95 MB