SATO CL4NX Programming Reference Manual page 499

*1 Occurring of buffer over depends on the interfaces
RS-232C
○
[o: Interface that buffer-over occurs, x: Interface that buffer-over doesn't occur]
2) Cancel request command
This command enables to cancel print jobs and to clear the entire contents of receive buffer.
The printer returns the printer status of after completion of current process.
*When the cancel request command has sent, wait more than 500 msec before sending the next data.
*This command shall not be used during sending printer data and other data.
(1) Command CAN (HEX 18H)
(2) Return status list
Return status
ACK (HEX 06H)
NAK (HEX 15H)
3) Print Command
The printer starts printing by receiving the print command (STX <A> ~<Z> ETX).
The printer returns the printer status after receiving process is completed.
(1)Return status list (Printer status)
RS-232C or Bluetooth
Return status
ACK (HEX 06H)
NAK (HEX 15H)
*In version after 1.8.0, Printer returns ACK not NAK when it is in Sleep mode and Wake Up mode.
Except RS-232C and Bluetooth
Return status
None
Example of the job ID number command <ID>
<A>
<ID>01
<V>100<H>100<P>2<L>0202<X20>,ABC
<Q>1
<Z>
Refer to the "Command Specification" for the details of job ID number command <ID>.
USB LAN
× ×
No error in the printer
Error in the printer
No error in the printer
Error in the printer
Not return status
Wireless LAN Bluetooth
× ×
Description
Description
Description
491
IEEE1284
×