SATO CL4NX Programming Reference Manual page 132

[Important]
1. In this case, barcode will not have specification such as Bar Width Ratio and HRI.
2. HRI will not be printed when barcode is error for barcode with HRI.
(5) Composition of check digit
Refer to the table below for check digit in each barcode.
[Composition of C/D]
Barcode
specification
parameter
3 JAN/EAN 13
4 JAN/EAN 8
C CODE 93
E UPC-E
G CODE 128
H UPC-A
UCC/EAN128 for
I
standard carton ID
[Note]
C/D stands for "Check Digit".
(6)Barcode Rotation Print
Print direction of barcode can be rotated. Note that when specifying Serial 1 and Serial 2 for barcode rotation, it may
cause blurring due to barcode enlargement ratio.
Avoid printing of 1-dot narrow bar since 1 dot becomes 0.125 / 0.083 / 0.042 mm when head density is 8dot/mm
(203dpi) or 12dot/mm (305dpi) or 24dot/mm (609dpi).
Parallel 1 : Forward feed print
Parallel 2 : Backfeed print at 180-degree rotation
Serial 1 : Forward feed print at 90-degree rotation
Serial 2 : Forward feed print at 270-degree rotation
1) To print with Parallel1 and Parallel2, specify enlargement ratio of bar width so that narrow bar gets at least 2 dots.
("L" indicates the enlargement ratio to the bar width ratio.)
Bar width ratio 1:2
Bar width ratio 1:3
Bar width ratio 2:5
UPC-A/EAN/JAN
2) If printing in serial 1 or serial 2 mode, specify the bar width expansion factor so that when using a 8 dots/mm or 12
dots/mm head the width of the narrow bar is at least 3 dots.
Bar ratio1:2
Bar ratio1:3
Bar ratio2:5
UPC-A/JAN/EAN
3) If printing in serial 1 or serial 2, reduce the print speed
Barcode
Input digit No.
specification
12-digit
13-digit
7-digit
8-digit
Max. 99- digit
6-digit only
-
11-digit only *1
17-digit only
8dots/mm(203dpi)
2L or more
2L or more
1L or more
2L or more
8dots/mm(203dpi)
3L or more
3L or more
2L or more
3L or more
Print digit number and contents
13-digit (Input data of barcode + C/D)
C/D is calculated by modulus10.
13-digit (Input data of barcode) C/D is not checked.
8-digit (Input data of barcode + C/D)
C/D is calculated by modulus10.
8-digit (Input data of barcode) C/D is not checked.
C/D is calculated by modulus47.
C/D is calculated by modulus10.
C/D is calculated by modulus103.
12-digit (Input data of barcode + C/D)
C/D is calculated by modulus10.
C/D is calculated by modulus103.
[Note] Forward feed:
Prints horizontally to label feed direction
Head density
12dots/mm(305dpi)
2L or more
2L or more
1L or more
2L or more
Head density
12dots/mm(305dpi)
3L or more
3L or more
2L or more
3L or more
124
24dots/mm(609dpi)
4L or more
4L or more
2L or more
4L or more
24dots/mm(609dpi)
6L or more
6L or more
4L or more
6L or more