Esc+Bi Gs1-128 (Ucc/Ean128) (Standard Carton Id Only) - SATO CL4NX Programming Reference Manual

9.10 Barcode
9.10
ESC+BI
GS1-128 (UCC/EAN128)
(Standard Carton ID Only)
(Standard Carton ID Only)
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within items
command
Valid range between items
[Function]
Specifying GS1-128(UCC/EAN128) barcode for Standard Carton ID.
[Format]
<BI>aabbbcn~n
●Parameter
a [Narrow bar]
b [Height of Barcode]
c [Barcode expository font specification] =
n [Print data]
For barcode data, refer to the GS1-128 (UCC/EAN128) code table.
EAN128 (Barcode for Standard Carton ID)
- Identifier of a continuous code for freight packaging
- Type of packaging
- Country/manufacturer code
- Serial No. for shipping container
- Check digit
Note that check digit is automatically added; therefore, specify data in 17 digits excluding check digit.
[Coding Example] Narrow bar width:05, Height of barcode:080, HRI: Available (Under part of barcode)
Print data:12345678901234567
<A>
<V>100<H>200<BI>05080212345678901234567
<Q>2
<Z>
[Supplementary Explanation]
1. UCC128 code is exclusive to Standard Carton ID. When printing in EAN128, designed for the markets in the medical,
fresh food, or flowers and plants, use CODE128 Barcode <BG> to specify print data with application identification or
separator that matches each specification.
2. Start character code, function character, end character code, and identification code (corresponds to [00] only) are
added automatically.
3. Modulus 10 check character and modulus 103 check character are automatically generated.
4. Sequential number of barcode data is available.
5. Line pitch between barcode and expository font is fixed at 10 dots.
6. If the width of expository font is wider than that of barcode, it starts printing from the print start position of barcode.
7. If the width of expository font is narrower than that of barcode, expository font will be aligned to the center of barcode
for printing.
8. Prints expository font in OCR-B.
9. If expository font is outside of print area, it will not be printed. When selecting [HRI is available], specify Vertical Print
Position <V> and Horizontal Print Position <H> in consideration of print of expository font.
10. When other than 0, 1, or 2 is specified as the barcode HRI font, it will be the same as the barcode HRI font
specification "0".
GS1-128 (UCC/EAN128)
BI Parameter
<42> <49> aabbbcn~n
16 16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
= Valid Range
= Valid Range
0
1
2
= Barcode data (Fixed 17 digits)
145
ESC+BI
: 01 to 36 dots
: 001 to 999 dots
: No HRI
: HRI is available (Upper part of barcode)
: HRI is available (Under part of barcode)