Appendix A: Command Code Quick Reference - SATO CL408 Operator And Technical Reference Manual

COMMAND CODE QUICK REFERENCE
INSTRUCTION DESCRIPTION
A Start Code. Begins all print jobs.
A(space)Z Form Feed. Feeds a blank tag or label.
AR Normal Print Length. This command resets the printer to the
Standard print length (7 inches).
AX Expanded Print Length. This command sets the printer to the
Expanded print length (14 inches). This command does not work with
the CL612.
A3H-aaaa Base Reference Point. Establishes a new base reference point
Vbbbb position in dots for the current label. Units of measurement are dots.
- =
aaaa = Horizontal Print Offset
bbbb = Vertical Print Offset
Babbcccd Bar Codes. Prints a 1:3 ratio bar code.
a
bb
ccc
d
SATO CL Series Printers
APPENDIX A.
Optional character. If included, will shift reference point in
negative direction.
CL408
+/- 0832
0001-1424
= 0 Codabar
1 Code 39
2 Interleaved 2 of 5 (I 2/5)
3 UPC-A/EAN-13
4 EAN-8
5 Industrial 2 of 5
6 Matrix 2 of 5
7 reserved
8 reserved
9 reserved
A MSI
B reserved
C Code 93
D reserved
E UPC-E
F Bookland
G Code 128
I UCC 128
= Number of dots (01-12) for narrow bar and narrow space
= Bar height in dots (001-600)
= UCC 128 only
0 No human readable text
1 Human readable at top
2 Human readable at bottom
9001035 Rev. E
CL412 CL608 CL612
+/- 1248 +/- 1216 +/- 1984
0001-2136 0001-1424 0001-2136
PAGE
Page 4-72
Page 4-40
Page 4-55
Page 4-55
Page 4-19
Page 4-11
Page A-1