Drum Fan; Removing The Drum Fan (Fm8) - Canon ImageRunner iR8500 Series Service Manual

[1]
[2]
[2]
3) Remove the 2 screws [1], and disconnect the 2 connectors [2]; then,
detach the delivery speed switching clutch [3].
[1]
[1]
[3]
When removing the delivery speed switching clutch, take care not to
lose the bearings and the washers (rear only) on both ends of the clutch
shaft.
4) Disconnect the connector [1], and remove the 2 screws [2]; them,
detach the curl-reducing fan [3].
[2]
[1]
11.5.32.2 Removing the Curl-Reducing Fan (FM6)
/ iR85+ / iR8070
1) Remove the fixing/feeding unit cover.
2) Disconnect the 4 connectors [1], and remove other 4 screws [2]; then,
detach the fixing motor base [3].
[3] [1]
[2]
F-11-138
[2]
F-11-139
[3]
[2]
F-11-140
0008-8262
[1]
[2]
[2]
3) Remove the 2 screws [1], and disconnect the 2 connectors [2]; then,
detach the delivery speed switching clutch [3].
[1]
[1]
[3]
When removing the delivery speed switching clutch, take care not to
lose the bearings and the washers (rear only) on both ends of the clutch
shaft.
4) Disconnect the connector [1], and remove the 2 screws [2]; them,
detach the curl-reducing fan [3].
[2]
[1]

11.5.33 Drum Fan

11.5.33.1 Removing the Drum Fan (FM8)

iR105i/iR105+ / iR9070 / iR8070
1) Remove the HV-DC PCB.
Chapter 11
[3] [1]
[2]
F-11-141
[2]
F-11-142
[3]
[2]
F-11-143
0007-3054
11-45