Feeder List - Canon ImageRunner iR8500 Series Service Manual

Sub-item
SENS-INT
BLT-CLN
REG-CLN

17.5.2.2 Feeder List

/ iR8070
FEEDER >FUNCTION
Sub-item
SENS-INT
17.5.2.3 Feeder List
FEEDER >FUNCTION
Sub-item
SENS-INT
BLT-CLN
REG-CLN
FEEDER >FUNCTION
Description
Use it to adjust the sensitivity of each sensor of the ADF.
Be sure to clean the sensor first.
<Using the Mode>
1) Select the item, and press the OK key.
2) Set that the machine stops automatically after adjustment.
Use it to clean the separation belt of the ADF.
<Using the Mode>
1) Select the item, and press the OK key.
2) Set that the machine drives the separation belt. Press the Stop key to stop the
operation.
Use it to clean the registration roller of the ADF.
<Using the Mode>
1) Select the mode, and press the OK key.
2) Set that the machine rotates the registration roller. Press the Stop key to stop
the operation.
FEEDER >FUNCTION
Description
Use it to adjust the sensitivity of each sensor of the ADF.
Be sure to clean the sensor first.
<Using the Mode>
1) Select the item, and press the OK key.
2) Set that the machine stops automatically after adjustment.
FEEDER >FUNCTION
Description
Use it to adjust the sensitivity of each sensor of the ADF.
Be sure to clean the sensor first.
<Using the Mode>
1) Select the item, and press the OK key.
2) Set that the machine stops automatically after adjustment.
Use it to clean the separation belt of the ADF.
<Using the Mode>
1) Select the item, and press the OK key.
2) Set that the machine drives the separation belt. Press the Stop key to stop the
operation.
Use it to clean the registration roller of the ADF.
<Using the Mode>
1) Select the mode, and press the OK key.
2) Set that the machine rotates the registration roller. Press the Stop key to stop
the operation.
T-17-170
T-17-171
T-17-172
Chapter 17
Level
1
1
1
0008-7969
Level
1
0008-7971
Level
1
1
1
17-127