Control Panel Support Unit; Removing The Control Panel Support Unit; Cover Switch Assembly; Removing The Front Cover Switch Assembly - Canon ImageRunner iR8500 Series Service Manual

[1]
11) Remove the 1 screw [1], and detach the left upper cover (small) [2].
[2]
[1]
12) Remove the 3 screws [1].
13) Turn over the control panel [2] to the front, and disconnect the
connector [3]; then, remove the control panel [2].
[3]
[1]

11.5.14 Control Panel Support Unit

11.5.14.1 Removing the Control Panel Support Unit

iR105i/iR105+ / iR9070
1) Remove the 2 screws [1], and detach the support front cover [2].
2) Remove the 5 screws [3], and detach the control panel rear cover [4].
[2] [1]
F-11-75
F-11-76
[2] [1]
F-11-77
0007-3006
[3]
[2]
[3]
3) Remove the 2 screws [1], 2 connector fixing screws [2], and 2 spring
washers [3]; then, detach the connector cover [4].
4) Remove the 9 screws [5], and detach the control panel support unit
[6].
[5]
[2]
[3]
[1]
[5]
[4]

11.5.15 Cover Switch Assembly

11.5.15.1 Removing the Front Cover Switch Assembly

iR105i/iR105+ / iR9070
1) Remove the upper front cover unit.
2) Remove the 3 screws [1], and detach the cover switch assembly [2].
[1]
3) Disconnect the 3 connectors [1], and detach the cover switch
assembly [2].
Chapter 11
[1]
[3]
[4]
F-11-78
[6]
[5]
F-11-79
[1]
[2]
F-11-80
0007-3080
11-33