Mounting The Fixing Assembly - Canon ImageRunner iR8500 Series Service Manual

Chapter 2
3) Slide out the fixing/feeding unit [1] toward the front.
[1]
4) Remove the tag [1] of the fixing/feeding assembly and the separation
releasing member [2].
Be sure to remove any foreign matter (e.g., glue left behind by the tape
[3]) from the feeding belt.
[3]
[1]
5) Remove the tape used to keep the tag in place, and open the top [1] of
the fixing/ feeding assembly; then, remove the 2 fixing nip releasing
screws [2] at the front and rear.
2-26
[4]
F-2-88
F-2-89
[2]
F-2-90
[2]
[1]
Close the top of the fixing/feeding unit.

2.2.12 Mounting the Fixing Assembly

1) Open the front cover.
2) Shift down the fixing/feeding assembly releasing lever [1] in the
direction of the arrow (left) to unlock the transfer/separation
charging assembly.
3) Slide out the fixing/feeding unit [1] toward the front.
[1]
4) Remove the tag [1] of the fixing/feeding assembly and the separation
releasing member [2].
Be sure to remove any foreign matter (e.g., glue left behind by the tape
[3]) from the feeding belt.
F-2-91
0007-2900
[1]
F-2-92
F-2-93