[3]
4) Close the hopper cover.
2.2.25 Supplying the Toner
1) Take out the toner cartridge [1] from the package.
2) Remove the fixing tape [1].
3) Open the hopper cover [1], and insert the toner cartridge [2] from the
front of the copier.
[2]
F-2-162
0007-3398
[1]
F-2-163
[1]
F-2-164
Be sure to insert the toner carridge so that its
marking match [3].
[3]
4) Close the hopper cover.
2.2.26 Mounting the ADF
iR105i/iR105+ / iR9070
1) Remove the air cap from the connector/power supply cable of the
ADF.
2) Fit the ADF connector [1] into the socket found at the back of the
copier.
2.2.27 Connectors
/ iR8070
1) Connect the cable [1] for the environment heater.
Chapter 2
[1]
[2]
F-2-165
marking and the copier's
[2]
F-2-166
0007-6686
[1]
F-2-167
0007-2400
2-39