Canon ImageRunner iR8500 Series Service Manual page 1035

Sub-item
ANIM-SW
MEAP-SSL
<USER>
COPY-LIM
SLEEP
WEB-DISP
W-TONER
COUNTER1
COUNTER2to6
CONTROL
B4-L-CNT
COPY-JOB
TAB-ROT
PR-PSESW
Turn MEAP application error/jam screen display ON or OFF
<Setting value>
0: OFF (Display warning screen) [Default]
1: ON (Do not display warning screen)
Setting the MEAP HTTPS port
<Setting value>
0 to 65535 (same as the setting of another network port system) [Default:
8443]
Sub-item
Changing the upper limit of copy count
<Setting value>
1 to 9999 [Default: 9999]
Turning the sleep function ON or OFF
<Setting value>
0: OFF
1: ON [Default]
The sleep function is set with Timer in User Mode.
Use it to turn ON/OFF the fixing web length message.
MEMO:
0: OFF (do not issued; but issued only when in service mode)
<Setting value>
0: OFF (do not issue; default)
1: ON (issue)
Use it to turn ON/OFF the waste toner case full warning message.
MEMO:
0: OFF (do not issue; but issue only when in service mode)
<Setting value>
0: OFF (do not issue; default)
1: ON (issue)
Setting Software counter 1 on the User mode screen
<Setting value>
101: Total 1
[Value at shipping / Value after RAM clearance = 101 -> Cannot be changed]
Setting Software counters 2 to 6 on the User mode screen
<Setting value>
0 to 999
Limiting the user of a control card for a PDL job
<Setting value>
0: Do not use [Default]
1: Use
Setting whether to count B4 as the large size or the small size on Software
counters 1 to 6
<Setting value>
0: Small size [Default]
1: Large size
Prohibiting copy job reservation when a card reader and a coin robot are used
<Setting value>
0: Copy job reserved [Default]
1: Copy job not reserved
If the image is a PDL landscape in PDL, use it to specify whether to rotate it 180
deg.
<Setting value>
0: do not rotate
1: rotate
Setting whether or not to display the print pause function switch
<Setting value>
0: No print pause function [Default]
The user screen does not display the print pause function. (Conventional
specification)
1: Print pause function [Default]
The user screen does not display the print output stop and restart settings.
COPIER > OPTION > BODY
Description
T-17-195
COPIER > OPTION >USER
Description
Chapter 17
Level
2
2
Level
1
1
1
1
1
1
1
1
1
1
1
17-191