Canon ImageRunner iR8500 Series Service Manual page 1033

Sub-item
BK-BD-11 Use it to set black band monthly remedial mode (for November).
<Setting value>
Same as for January.
BK-BD-12 Use it to set black band monthly remedial mode (for December).
<Setting value>
Same as for January.
SMTPTXPN Use it to change the number of the SMTP transmission port:
<Setting value>
0 to 65535 (in increments of 1)
Default: 25
After a change, be sure to re-boot the machine.
SMTPRXPN Use it to change the number of the SMTP reception port.
<Setting value>
0 to 65535 (in increments of 1)
Default: 25
After a change, be sure to re-boot the machine.
POP3PN Use it to change the number of the P0P3 reception port:
<Setting value>
0 to 65535 (in increments of 1)
Default: 110
After a change, be sure to re-boot the machine.
RUI-DSP Setting whether to display a copy screen for RUI (Option switch conforming
to the Disability Law)
<Setting value>
0: Do not display [Default]
1: Display
ORG-LGL Use it to set the size of a special paper type not recognized by the feeder.
<Setting value>
0: FLSC (Default)
1: M_OFFICIO
2: A_FFLSC
3: FORIO
4: G_LGL
5: OFFICIO
6: E_OFFICIO
7: A_OFFICIO
8: A_LGL
ORG-LTR Use it to set the size of a special paper type not recognized by the feeder.
<Setting value>
0: LTR (default)
1: G_LTR
2: EXECTIVE
3: K_LGL
4: A_LTR
ORG-LDR Use it to set the sequence in which double-sided originals are read when the
original orientation detection mechanism is enabled.
<Setting value>
0: LGL (default)
1: B_OFFICIO
UI-BOX Setting whether or not to display the box screen of the operating section
<Setting value>
0: Do not display
1: Display [Default]
UI-SEND Setting whether or not to display the send screen of the operating section
<Setting value>
0: Do not display
1: Display [Default]
UI-FAX Setting whether or not to display the fax screen of the operating section
not used
UI-EXT Setting whether or not to display the extended screen of the operating section
<Setting value>
0: Do not display
1: Display [Default]
NW-SPEED Selecting the data transfer speed at service network connection
<Setting value>
0: Auto [Default]
1: 100Base-TX
2: 100Base-T
COPIER > OPTION > BODY
Description
Chapter 17
Level
2
2
2
2
2
2
2
2
2
2
2
2
2
2
17-189