Fitting The Drive Belt; Attaching The Drive Belts - Canon ImageRunner iR8500 Series Service Manual

Chapter 14
Butt the rack plate [1] of the manual feed tray against A (open state).
Move the slide volume [2] in the direction of B, and attach the timing
belt [3] to the pulley [4].
[3]
[4]
[2]

14.8.37 Fitting the Drive Belt

iR105i/iR105+ / iR9070
Fit the drive belt to the pulleys and rollers as follows:
Developing/waste toner drive belt
Pickup motor

14.8.38 Attaching the Drive Belts

/ iR85+ / iR8070
Be sure to attach the drive belts on the pulleys and the rollers as shown.
14-68
[1]
[4]
A
B
F-14-167
0007-0652
Main motor
Main drive belt
Pickup drive belt
F-14-168
0008-8429
Developing/waste toner drive belt
Pickup
motor
Pickup drive belt
F-14-169
Main motor
Main drive belt