Developing Cylinder Clutch; Remove The Developing Cylinder Clutch - Canon ImageRunner iR8500 Series Service Manual

Chapter 8
4) Remove the heater developing cylinder deceleration clutch [1].
5) Remove the 6 E-rings [1], 2 bearings [2], gear [3], and pin [4]; then,
detach the clutch [5].
[1]
[2]
[1]
[1]
8.9.11.2 Remove the Developing Cylinder Deceleration
Clutch
/ iR85+ / iR8070
1) Remove the high-voltage transformer (DC) assembly.
2) Remove the flywheel.
3) Disconnect the 2 connectors [1], and remove the 5 screws [2]; then,
detach the clutch mounting plate [3].
[1]
[2]
[1]
4) Remove the heater developing cylinder deceleration clutch [1].
8-50
[1]
F-8-107
[5]
[1]
[2]
[1]
[1]
[3]
[4]
F-8-108
0008-8176
[2] [3]
[2]
F-8-109
5) Remove the 6 E-rings [1], 2 bearings [2], gear [3], and pin [4]; then,
detach the clutch [5].
[1]
[2]
[1]
[1]

8.9.12 Developing Cylinder Clutch

8.9.12.1 Remove the Developing Cylinder Clutch

iR105i/iR105+ / iR9070
1) Remove the clutch mounting plate.
2) Take out the developing cylinder clutch [1].
3) Remove the 8 E-rings [1], 2 beatings [2], 2 gears [3], and pin [4]; then,
detach the clutch [5].
[1]
F-8-110
[5]
[1]
[2]
[1]
[1]
[3]
[4]
F-8-111
0007-2719
[1]
F-8-112