Canon ImageRunner iR8500 Series Service Manual page 990

Chapter 17
Sub-item
PD-SIZE
CC-SPSW
<INT-FACE>
Sub-item
IMG-CONT
AP-OPT
AP-ACCNT
AP-CODE
<LCNS-TR>
Example of display: ST-XXXX 1 ( ) {0 to 0}
[1] [2]
[1] Status display 0: Not installed [Default] 1: Installed
[2] Invalidation 0: Invalidate (Only 0 can be entered.)
Transfer invalidation procedure
1. Select ST-XXXX, enter 0, and press the OK key.
2. A transfer license number (24 digits) is displayed at TR-XXXX.
Sub-item
ST-SEND
TR-SEND
ST-ENPDF
17-146
COPIER > OPTION > ACC
Setting the Paper Deck Size
<Setting value>
0: [Default]
22: K-LGL
23: K-LGLR
24: FLSC
25: A-FLS
26: OFI
27: E-OFI
28: B-OFI
29: A-LTR
30: A-LTRR
31: G-LTR
32: G-LTRR
33: A-LGL
34: G-LGL
35: FGLI
36: A-OFI
37: M-OFI
Setting whether or not to support the control card (CC IV /CCV) interface
<Setting value>
0: Do not support [Default]
1: Support
COPIER > OPTION > INT-FACE
Use it to recognize an external EFI controller.
<Setting value>
0: There is no external controller.
1 to 4 There is an external controller.
Permitting or prohibiting printing from the PrintMe application installed in the PS
print server unit
<Setting value>
0: Printing is allowed with unspecified ID [Default: 0]
1: Printing is allowed with specified account
2: Printing is rejected
Setting a department ID for a print job from the PrintMe application installed in the
PS print server unit
<Setting value>
0 to 99999999 [Default: 0]
Setting a CPCA path for a print job from the PrintMe application installed in the PS
print server unit
<Setting value>
0 to 99999999 [Default: 0]
COPIER >OPTION >LCNS-TR
Displaying the send function installation status in transfer invalidation and executing
transfer invalidation
Acquiring a transfer license key for the send function in transfer invalidation
Displaying the encrypted PDF send function installation status in transfer
invalidation and executing transfer invalidation
Description
T-17-178
Description
T-17-179
Description
Level
1
2
Level
1
2
2
2
Level
2
2
2