Canon ImageRunner iR8500 Series Service Manual page 1034

Chapter 17
Sub-item
TRY-CHG
STS-PORT
CMD-PORT
NS-CMD5
NS-GSAPI
NS-NTLM
NS-PLNWS
NS-PLN
NS-LGN
MEAP-PN
SVMD-ENT
DA-CNCT
CHNG-STS
CHNG-CMD
MEAP-DSP
17-190
COPIER > OPTION > BODY
Description
Use it to change the control mechanism used to switch over trays when one
becomes full.
MEMO:
This item is displayed only at the time of Stacker-A1 connection.
Turning the TOT synchronous command communication port ON or OFF
The port for Inquiry/Response (synchronous) command communication in
TUIF over TCP/IP is turned ON or OFF.
<Setting value>
0: OFF [Default]
1: ON
Turning the TOT asynchronous status communication port ON or OFF
The port for asynchronous status communication in TUIF over TCP/IP is
turned ON or OFF.
<Setting value>
0: OFF [Default]
1: ON
Limiting the use of CRAM-MD5 in SMTP authentication
This is set to limit the use of CRAM-MD5 in SMTP authentication
<Setting value>
0: Dependent on the SMTP server [Default]
1: Do not use
Limiting the use of GSSAPI in SMTP authentication
This is set to limit the use of GSSAPI in SMTP authentication.
<Setting value>
0: Dependent on the SMTP server [Default]
1: Do not use
Limiting the use of NTLM in SMTP authentication
This is set to limit the use of NTLM in SMTP authentication.
<Setting value>
0: Dependent on the SMTP server [Default]
1: Do not use
Limiting the use of PLAIN and LOGIN for SMTP authentication in an
environment of communication packet encryption
This is set to limit the use of PLAIN and LOGIN for SMTP authentication in
an environment where communication packets are encrypted
<Setting value>
0: Dependent on the SMTP server [Default]
1: Do not use
Limiting the use of PLAIN and LOGIN for SMTP authentication in an
environment
This is set to limit the use of PLAIN and LOGIN for SMTP authentication in
an environment where communication packets are not encrypted.
<Setting value>
0: Dependent on the SMTP server [Default]
1: Do not use
Limiting the use of LOGIN for SMTP authentication
This is set to limit the use of LOGIN for SMTP authentication in an
environment where communication packets are encrypted
<Setting value>
0: Dependent on the SMTP server [Default]
1: Do not use
Changing the HTTP port number of the MEAP application
<Setting value>
0 to 65535 (Default: 8000)
Switching how to enter service mode
<Setting value>
0: [User mode key] -> Simultaneous press of [2] and [*]-> [User mode]
(Default)
1: [User mode key] -> Simultaneous press of [4] and [9]-> [User mode]
Reserved for future
indicates the ToT status component number.
sets the port number for the status connection when TUIF over TTCP/IP is in
use.
<Setting value>:1-65535
setting:20010
sets the port number for command connection when TUIF over TCP/IP is in
use.
<Setting value>:1-65535
setting:20000
Turning screen transition from MEAP to Native ON or OFF
<Setting value>
0: OFF (Transition to the Native screen) [Default]
1: ON (No transition to the Native screen)
Level
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2