Canon ImageRunner iR8500 Series Service Manual page 960

Chapter 17
Code
1
2
3
4
5
6
7
Code
1
2
3
4
5
6
7
<CLEAR>
Sub-item
ERR
DC-CON
JAM-HIST
ERR-HIST
PWD-CLR
ADRS-BK
CNT-MCON
CNT-DCON
17-116
Name
Drum motor (M0)
Main motor (M1)
Pickup motor (M2)
Fixing motor (M3)
Laser scanner motor (M4)
Inside cartridge toner feed motor (M6)
Inside hopper toner feed motor (M18)
Name
deck (right) pickup solenoid (SL7)
deck (left) pickup solenoid (SL8)
cassette 3 pickup solenoid (SL9)
cassette 4 pickup solenoid (SL10)
manual feed pickup clutch solenoid (SL6)
The manual feed pickup roller moves up.
manual feed pickup clutch solenoid (SL6)
The manual feed pickup roller moves down
delivery flapper solenoid (SL3)
COPIER > FUNCTION > CLEAR
Clearing an error code
<Operating procedure>
1) Select this item and press the OK key.
2) Turn the main power switch OFF and ON.
Clearing RAM on the DC controller circuit board
The RAM is cleared when the main power switch is turned OFF and ON.
<Operating procedure>
1) Select COPIER>FUNCTION>MISC-P>P-PRINT to print out the contents of
the service mode.
2) Select this item and press the OK key.
3) Turn the main power switch OFF and ON.
4) Enter the P-PRINT output data as required.
Clearing the jam history
The jam history is cleared when the OK key is pressed.
<Operating procedure>
1) Select this item and press the OK key.
Clearing the error history
The error history is cleared when the OK key is pressed.
<Operating procedure>
1) Select this item and press the OK key.
Clearing the password of the system administrator set in user mode
The password is cleared when the OK key is pressed.
<Operating procedure>
1) Select this item and press the OK key.
Clearing the address book on the reader controller circuit board
The address book is cleared when the main power switch is turned OFF and ON.
<Operating procedure>
1) Select this item and press the OK key.
2) Turn the main power switch OFF and ON.
Clearing the service counter incremented by the main controller circuit board
The password is cleared when the OK key is pressed.
<Operating procedure>
1) Select this item and press the OK key.
Clearing a service counter incremented by the DC controller circuit board
The password is cleared when the OK key is pressed.
This applies to SORT, FIN-STPR, SADDLE, and SDL-STPL under
COPIER>COUNTER>DRBL-2.
<Operating procedure>
1) Select this item and press the OK key.
T-17-148
Code Name
8 Horizontal registration motor (M15)
9 Duplex reversal motor (M11)
10 duplex feed motor (M12)
11 deck main motor (M101)
T-17-149
Code Name
8 reversal flapper solenoid (SL11)
9 fixing web solenoid (SL2)
10 fixing feed unit lock solenoid (SL4)locked
11 fixing feed unit lock solenoid (SL4)released
12 Not-used
13 side paper deck pickup solenoid
T-17-150
Description Level
1
1
1
1
1
1
1
1