Chapter 8
Boss
8.9.14 Pre-Transfer Exposure LED
8.9.14.1 Removing the Pre-Transfer Exposure LED
iR105i/iR105+ / iR9070
1) Slide out the pre-transfer charging assembly.
When placing the removed pretransfer charging assembly, be sure to
take care not to subject the LED to impact.
2) Turn over the pre-transfer charging assembly, and remove the 3
screws [1] found on the bottom; then, detach the LED cover [2].
[2]
3) Disconnect the connector [1], and remove the pre-transfer exposure
LED [2].
8-52
Boss
F-8-119
0007-2710
[1]
F-8-120
[2]
8.9.14.2 Removing the Pre-Transfer Exposure LED
/ iR85+ / iR8070
1) Slide out the pre-transfer charging assembly.
When placing the removed pretransfer charging assembly, be sure to
take care not to subject the LED to impact.
2) Turn over the pre-transfer charging assembly, and remove the 3
screws [1] found on the bottom; then, detach the LED cover [2].
[2]
3) Disconnect the connector [1], and remove the pre-transfer exposure
LED [2].
[2]
[1]
F-8-121
0008-8174
[1]
F-8-122
[1]
F-8-123