Canon ImageRunner iR8500 Series Service Manual page 1000

Chapter 17
MF-LG-ST
SPECK-DP
CNT-DISP
PH-D-SEL
OP-SZ-DT
NW-SCAN
INS-C/S
TBIC-RNK
HDCR-DSP
BCK-CVR
JOB-INVL
LGSW-DSP
PCL-COPY
OUT-FD
17-156
Sub-item
Setting the long mode key
<Setting value>
0: Ordinary [Default]
1: Display a long mode key on the corresponding mode screen
Use it to enable/disable indication of a warning for dust detection in
streamreading.
<Setting value>
0: disable indication (default), 1: enable indication
Setting whether or not to display a serial number when the counter confirmation
key is pressed
<Setting value>
0: Display a serial number [Default]
1: Do not display a serial number
Setting the number of lines for printing in Photo mode
<Setting value>
0: 141 lines [Default]
1: 134 lines
switches on or off the original size detection function with the copyboard cover
open.
0: disable size detection if the copyboard cover is open (default; the appropriate
original size must be entered manually on the control panel).
1: enable original size detection when the copyboard cover is open (use it if auto
size detection is desired as when copying a book; detection is executed in response
to a press on the Start key).
Enabling or disabling the network scan function
<Setting value>
0: Network scan function disabled [Default]
1: Network scan function enabled
MEMO:
Not changeable for anything in Japan
Always 1 for PSPCL outside Japan
Changeable for other outside Japan
Use it to expand the inserter function.
<Setting value>
0: support cover only (default)
1: support cover + interleaf (multi inserter)
Use it to reduce uneven intervals.
<Setting value>
1 to 5 (default: 1)
Setting whether or not display HDD clearance in User mode and changing the
contents of clearance
<Setting value>
1: Clear once with 0 [Default]
2: Clear once with random data
3: Clear three times with random data
Use it to enable or disable the back cover mode function.
<Setting value>
0: disable back cover mode
1: enable back cover mode
Setting the job interval at interrupt
<Setting value>
0: Output the next job continuously in interrupt copying (Standard) [Default]
1: Start outputting the next job after the last paper of the interrupted copy job is
output
2: Start outputting the next job after the last paper of all jobs is output
Setting whether or not to display [Log display ON/OFF] on the User mode screen
[Default]
0: Do not display [Log display ON/OFF] [Default]
1: Display [Log display ON/OFF]
Supporting the PCL command [COPIES Meru/Pinatubo/Hood]
<Setting value>
0: Control each page according to the command of the COPIES command
specified to the page [Default]
1: Meru/Pinatubo/Hood compatible mode
2 to 65535: Reserved
Use it to select face-down (FD) delivery at all times.
<Setting value>
0: use facedown output normally
1: use facedown output at all times
COPIER > OPTION >USER
Description Level
2
2
2
2
2
2
2
2
2
2
2
2
2
2