Scheduled Service Items - Canon ImageRunner iR8500 Series Service Manual

Chapter 13
13
Check to make sure that the grounding is correct; otherwise, leakage may not trigger the
leakage breaker.
14
15
16

13.3.5 Scheduled Service Items

iR105i/iR105+ / iR9070
Do not use solvents or oils not indicated herein.
Unit
Externals and
controls
Scanner system Scanner wire
Optical system No. 1 to No. 3 mirrors
Charging
assembly
13-28
Press the leakage breaker test
switch to make sure that the
breaker operates normally.
Thereafter,
turn off the power switch,
and shift the lever to ON position;
then, turn on the power switch.
Put the test prints in order, and
clean up the area around the
machine.
Record the latest counter readings.
Record the latest counter readings. Record the results of the
Location
Copyboard glass
Ozone filter (FM2,
FM8, M20)
Dust filter (FM1 (2
pc.), FM3, FM10, front
cover, upper front
cover)
Scanner rail
Dust-proof glass
Reflecting plate
Standard white plate
Pre-transfer exposure
LED
Charging wire
(Primary)
Charging wire
(Transfer/separation)
Charging wire (Pre-
transfer)
Press the test switch while
the power switch is ON and
the lever [1] of the leakage
breaker is at ON; if normal,
the lever should shift to OFF
position to cut off the power
(Pay attention to the
orientation
whenever replacing the
breaker. If you have replaced
the breaker, be sure to check
its operation).
check made on the leakage
breaker in the Service Book.
T-13-24
Service interval
installation every every
500,000 1,000,000
Clean
Clean Replace
Clean
Check
Adjust
Clean
Lubricate
Clean
Clean
Clean
Clean
Clean Replace
Clean Replace
Clean Replace
Clean Replace
[1]
Remarks
Remove dust from the
filter surface.
Remove dust from the
filter surface.
Check only at initial
500,000 pages.
Use silicone oil
S-20 (FY9-6011)
If high temperature/
humidity, every
250,000 pages.
If high temperature/
humidity, every
250,000 pages.
If high temperature/
humidity, every
250,000 pages.
0006-9902