Some parts of the machine must be replaced on a periodical basis to ensure a specific level of product performance; once they fail, the consequences will
be appreciable.
If possible, plan the replacement to coincide with a scheduled visit.
13.1.2 Overview
/ iR85+ / iR8070
Some parts of the machine must be replaced on a periodical basis to maintain a specific
level of machine performance; replace them as indicated (Once they fail, the machine performance
will be appreciably affected).
If possible, plan the replacement so that it will coincide with a periodical servicing visit
for the machine.
13.1.3 Main Body
iR105i/iR105+ / iR9070
No.
1
2
3
4
5
6
7
8
* Older type (full-plated) must not be used.
After replacing the charging wire, be sure to execute wire cleaning in service mode: COPIER> FUNCTION> CLEANING> WIRE-CLN.
* After servicing the charging assembly, be sure to mount it back while moving the cleaning holder toward the front.