Fixing Feeding Unit Releasing Lever Sensor; Removing The Fixing Feeding Unit Releasing Lever Sensor; Feeding Belt; Removing The Feeding Belt - Canon ImageRunner iR8500 Series Service Manual

[1]
4) Remove the E-ring [1] at the front of the roller shaft, and move the
bearing [2] toward the inside; then, detach the vertical path roller 2
[3].
[1]
[2]
9.10.17.4 Removing the Vertical Path Roller 2
/ iR85+ / iR8070
1) Slide out the deck (right) and the caste 3/4.
2) Remove the 3 screws [1], and detach the right lower front cover [2].
[1]
[1]
3) Disconnect the connector [1] and the screw [2]; then, detach the guide
plate [3].
[2]
[3]
F-9-161
[3]
F-9-162
0008-8183
[1]
[2]
F-9-163
[1]
4) Remove the E-ring [1] at the front of the roller shaft, and move the
bearing [2] toward the inside; then, detach the vertical path roller 2
[3].
[1]
[2]

9.10.18 Fixing Feeding Unit Releasing Lever Sensor

9.10.18.1 Removing the Fixing Feeding Unit Releasing
lever Sensor
iR105i/iR105+ / iR9070 / iR85+ / iR8070
1) Slide out the fixing feeding unit from the main body.
2) Detach the fixing feeding unit front cover.
3) Release the claw of the fixing feeding unit releasing lever sensor [1].
[1]

9.10.19 Feeding Belt

9.10.19.1 Removing the Feeding Belt

iR105i/iR105+ / iR9070 / iR85+ / iR8070
1) Slide out the fixing feeding unit from the main body.
2) Remove the fixing feeding unit front cover.
3) Disconnect the three connectors [1], and remove the screw [2]; then,
detach the harness guide [3].
Chapter 9
[2]
[3]
F-9-164
[3]
F-9-165
0007-1408
F-9-166
0007-1382
9-71