*1: The notation within parenthesis indicates modes supported by the basic counter.
*2: To change the contents of a counter or to enable/disable indication, use service mode. (This, however, does not apply to counter 1, whose data cannot
be changed.)
11.2.2 Soft Counters
iR85+
The machine is equipped with soft counters to keep count of prints it makes. The counter readings are checked by pressing the Check key in the control
panel.
The counters are controlled by the main controller PCB, and the readings are incremented when the following sensors detect paper during printing.
Printing operation
Single-sided
Double-sided
The counter mechanism consists of 16 items for large-size and small-size sheet, each with 8 mode items.
Printing mode
Load copy
PDL print
Box print
Remote copy print
FAX reception print*2
Report print
Double-sided print
Scan
*1: At time of shipment from the factory, B4 or smaller; to count B4 as large-size, use service mode.
*2: Not counted; the machine is not equipped with copy or fax functions.
The counters are set as follows when the machine is shipped from the factory to suit its country of installation: