Removing The Rear Cover; Removing The System Connector Cover; Removing The Main Controller Box Cover; Removing The Controller Fan - Canon ImageRunner iR8500 Series Service Manual

Chapter 4

4.7.6.2 Removing the Rear Cover

iR85+
1) Remove the 11 mounting screws [1], and detach the rear cover [2].
[1]
[1]
4.7.6.3 Removing the Rear Cover
/ iR8070
1) Remove the rear upper cover (4 screws).
2) Remove the 10 mounting screws [1], and detach the rear cover [2].
[1]
[1]

4.7.6.4 Removing the System Connector Cover

iR105i/iR105+ / iR9070 / iR85+ / iR8070
1) Remove the 2 screws [1], and detach the system connector cover [2].
4-34
0008-9370
[2]
F-4-67
0008-9696
[2]
F-4-68
0008-4389
[1]

4.7.6.5 Removing the Main Controller Box Cover

iR105i/iR105+ / iR9070 / iR85+ / iR8070
1) Remove the 4 screws [1], and detach the main controller box cover
[2].

4.7.6.6 Removing the Controller Fan

iR105i/iR105+ / iR9070 / iR85+ / iR8070
1) Disconnect the connector [1], and pass the detached connector cable
to the outside of the controller box through an opening of the cable
clip [2].
[1]
2) Remove the 2 screws [1], and detach the controller fan [2].
[2]
F-4-69
0008-4388
[1]
[2]
[1]
F-4-70
0008-2668
[2]
F-4-71