Delivery Anti-Adhesion Fan; Removing The Delivery Anti-Adhesion Fan (Fm17) - Canon ImageRunner iR8500 Series Service Manual

Chapter 11
11.5.39.2 Removing the Developing Fan (FM15)
/ iR85+ / iR8070
1) Remove the primary charging assembly.
2) Disconnect the connector [1], and remove the 2 screws [2]; then,
detach the fan unit [3].
[2]
3) Remove the 2 screws [1], and detach the developing assembly fan [2].
[1]
[2]
[1]
When mounting the fan, be sure that the direction of air current is as
indicated by the arrow.

11.5.40 Delivery Anti-Adhesion Fan

11.5.40.1 Removing the Delivery Anti-Adhesion Fan
(FM17)
iR105i/iR105+ / iR9070
1) Remove the left lower cover. (4 screws)
2) Disconnect the connector [1], and remove the 2 screws [2]; then,
detach the fan unit [3].
11-50
0008-8266
[3]
[1]
F-11-164
F-11-165
0007-3066
[2]
[3]
3) Remove the 2 screws [1], and detach the fan [2].
[2]
11.5.40.2 Removing the Delivery Anti-Adhesion Fan
(FM17)
/ iR85+ / iR8070
1) Remove the left lower cover (4 screws).
2) Disconnect the connector [1], and remove the 2 screws [2]; then,
detach the fan unit [3].
[2]
[3]
3) Remove the 2 screws [1], and detach the fan [2].
[2]
[1]
F-11-166
[1]
F-11-167
0008-8268
[1]
F-11-168
[1]
F-11-169