Mounting The Scanner System; Unpacking - Canon ImageRunner iR8500 Series Service Manual

[3]
[1]
[2]
[3]
[1]
12) Open the front cover [1] and then the compartment cover [2]; then,
store the grips [3] used in compartment behind the front cover.
Close the compartment cover, and close the front cover.
13) Mount the removed face covers to the right and left sides.
Open the right upper cover, and mount the small and large face covers.
Close the right upper cover.
If condensation is found on the outside or inside of the machine after
unpacking, stop the work before moving to the next step so that the
machine will become used to the room temperature.
Be sure of the absence of condensation when resuming the work.
[1]
[2]
[2]
F-2-41
[2]
[3]
[1]
F-2-42

2.2.3 Mounting the Scanner System

iR105i/iR105+ / iR9070
1) Remove the packing tape from the copier.
2) Open the ADF.
Remove the copyboard glass protective pad.
3) Remove the packing tape [1] from the scanner fixing.
Slide the scanner fixing [2] to the front to detach. (Store away the
fixing, as you will need it to secure the scanner when relocating the
machine.)
[1]
[2]

2.2.4 Unpacking

/ iR8070
1) Unpack the copier.
Open the plastic bag.
Insert a flat-blade screwdriver into the top of the grip cover [1] (2 pc.)
on the left side of the machine, and detach the cover.
Shift up the grips [2].
[2]
[1]
2) Detach the grip cover [1] on the right side of the machine (using a flat-
blade screwdriver), and shift up the grip [2] at the rear.
Chapter 2
0007-6604
F-2-43
0007-1778
[2]
F-2-44
2-17