Position The Fixing/Feeder Unit Locking Solenoid (Sl4); Position Of The Fixing Feeding Unit Locking Solenoid (Sl4); Position Of The Multifeeder Latch Solenoid (Sl6); Adjusting The Position For The Multifeeder Pickup Latch Solenoid (Sl6) - Canon ImageRunner iR8500 Series Service Manual

14.8.23 Position the Fixing/Feeder Unit Locking
Solenoid (SL4)
iR105i/iR105+ / iR9070
Use the screw [3] to adjust the position of the solenoid [1] so that the
locking lever [2] is 10.5 -/+ 0.5 mm away from the frame when the
solenoid is ON (i.e., when the steel core is drawn).
[3]
[1]
14.8.24 Position of the Fixing Feeding Unit Locking
Solenoid (SL4)
/ iR85+ / iR8070
Adjust the position of the solenoid using the screw [3] so that the locking
lever [2] will stick out 10.5 ±0.5 mm from the frame when the solenoid
[1] goes ON (i.e., the steel core is drawn).
[3]
[1]
14.8.25 Position of the Multifeeder Latch Solenoid
(SL6)
iR105i/iR105+ / iR9070
Slide the solenoid in the direction of A so that the gap between the
shutter [1] and the shutter plate [2] is 0.4 -/+ 0.2 mm when the solenoid
[1]
[2]
F-14-151
0007-0639
[2]
F-14-152
0008-8390
[2]
F-14-153
0007-0642
is drawn.
A
[1]
14.8.26 Adjusting the Position for the Multifeeder
Pickup Latch Solenoid (SL6)
/ iR85+ / iR8070
Adjust the solenoid in the direction of A to adjust so that the gap
between the shutter [1] and the shutter plate [2] is 0.4 ±0.2 mm when the
solenoid is pulled.
A
[1]
14.8.27 Position of the Deck (right) Pickup Solenoid
(SL7)
iR105i/iR105+ / iR9070
Use the screw [3] so that the distance from the pickup unit bottom of
each cassette holder and the bushing bottom edge of the A roller support
Chapter 14
F-14-154
[2]
F-14-155
0008-8391
F-14-156
[2]
F-14-157
0007-0644
14-65