[2]
3) Shift down the fixing/feeding assembly releasing lever [1] in the
direction of the arrow (left) to unlock the transfer/separation
charging assembly.
4) Slide out the fixing/feeding unit [1] toward the front.
[1]
5) Remove the tag [1] of the fixing/feeding assembly and the separation
releasing member [2].
Be sure to remove any foreign matter (e.g., glue left behind by the tape
[3]) from the feeding belt.
[3]
[1]
F-2-70
[1]
F-2-71
F-2-72
[3]
6) Remove the tape used to keep the tag in place, and open the top [1] of
the fixing/ feeding assembly; then, remove the 2 fixing nip releasing
screws [2] at the front and rear.
[1]
Close the top of the fixing/feeding unit.
2.2.8 Mounting the Scanner System
/ iR8070
1) Remove the packing tape from the copier.
2) Open the ADF.
Remove the copyboard glass protective padding.
3) Remove the scanning fixing screw [1] identified with a tag.
(Store away the fixings for possible relocation of the machine in the
future).
[1]
2.2.9 Mounting the Scanner System
Chapter 2
[2]
[1]
F-2-73
[2]
F-2-74
0007-2044
F-2-75
0007-2895
2-23