Removing The Vertical Path Roller 2 - Canon ImageRunner iR8500 Series Service Manual

Chapter 9
[3]
[2]
4) Remove the E-ring [1], and remove the bearing [2] to detach the
vertical path roller [3].
[1]
9.10.17.2 Removing the Vertical Path Roller 1/3/4
/ iR85+ / iR8070
1) Remove the deck right/cassette pickup assembly.
2) Remove the E-ring [1] and the bearing [2] from the front, and remove
the grip ring [3], clutch [4], and bearing [5] from the rear.
[4] [5]
[3]
3) Remove the E-ring [1] of the front and the rear of the roller shaft, and
move the bearings [2] toward the inside; then, detach the guide plate
[3].
9-70
[2]
[1]
[1]
F-9-155
[3]
[2]
F-9-156
[2]
[1]
F-9-157
4) Remove the E-ring [1], and remove the bearing [2] to detach the
vertical path roller [3].

9.10.17.3 Removing the Vertical Path Roller 2

0008-8182
iR105i/iR105+ / iR9070
1) Slide out the deck (right) and the caste 3/4.
2) Remove the 3 screws [1], and detach the right lower front cover [2].
3) Disconnect the connector [1] and the screw [2]; then, detach the guide
plate [3].
[2]
[1]
[3]
[2]
[1]
F-9-158
[3]
[2]
[1]
F-9-159
[1]
[1]
[2]
[1]
F-9-160
0007-2866