Canon ImageRunner iR8500 Series Service Manual page 175

[When Installing a Copy Data Controller-A1 to a 230V Model]
4) Remove the connector fixing screw (bottom) [1].
Bend the terminal of the grounding wire [2] that comes with the machine to the outside, and mount it using a connector fixing screw [1].
5) Connect the connector J525 [1] of the host machine and the cable [3] of the controller.
6) Mount the controller [2] using 4 screws.
At this time, be sure to tighten the other terminal [3] of the grounding wire using the right lower screw.
[2]
[1]
[1]
F-2-257
[2]
[1]
F-2-258
[2]
F-2-259
[1]
[1]
Chapter 2
2-73